Skip to main content Skip to site navigation

Engineering Standards, Specifications and Drawings

Overview

Engineering Standards, Specifications and Drawings

Select the specification you need from the list below.

Though many of the actual specifications can be found in the Engineering Provisions area of this site, below are some other guidelines that may be helpful.

Guidelines for Booster Pump Stations, Lift Stations and Reservoirs

In addition, the following are also available:

Approved Materials List Requirements Letter (EN-194) (06/07/2022)
Approved Materials List (See Engineering Provisions)
Approved Soils Engineers List for Developers (10/05/2022)
Approved Probationary Soils Engineers List for Developers (12/26/2023)
Hot Tap Contractors (07/27/2023)                                                                                                     

Section Specification Revision Date
01

Development Services Department and Facility Design Guidelines

10/05/2023
02

Water Standard Drawings

 
03

Water System Specification: Detailed Provisions

Provisions that comprise this specification:

  • Section 02718 – Installation of Water Pipeline
  • Section 15057 – Ductile Iron Water Pipe & Fittings
  • Section 15058 – Cast Iron Fittings
  • Section 15059 – Welded Steel Fittings
  • Section 15061 – Steel Cylinder Water Pipe
  • Section 15064 – Plastic (PVC) Water Pipe & Fittings
  • Section 15072 – Asbestos-Cement Water Pipe
  • Section 15081 – Gaskets
  • Section 15089 – Nuts & Bolts
  • Section 15102 – Resilient-Seated Gate Valves
  • Section 15103 – Butterfly Valves
See Engineering Provisions
04

Sewer Standard Drawings

 
05

Sewer Specification – Detailed Provisions

Provisions that comprise this specification:

  • Section 02761 – Furnish & Install VCP Sewer Pipe System
  • Section 02762 – Furnish & Install Plastic Sewer Pipe System
  • Section 02769 – Furnish & Install High Density Polyethylene (HDPE) Sewer Pipe System
  • Section 15330 – Vitrified Clay Sewer Pipe (Plain End)
  • Section 15331 – Vitrified Clay Sewer Pipe (Bell & Spigot)
  • Section 15333 – Cast Iron & Ductile Iron Sewer Pipe
  • Section 15340 – Manholes & Fittings
See Engineering Provisions
06

Recycled Water Standard Drawings (EMWD offsite facilities)

 
07

General Construction Specifications

Provisions that comprise this specification:

  • Section 02201 – Construction Methods and Earthwork
  • Section 02252 – Control Density Fill
  • Section 03300 – Cast-in-Place Concrete
See Engineering Provisions
08 Approved Materials List See Engineering Provisions
09 Recycled Water Irrigation Guidelines
Mitigation Measures & CAD Standard Guideline
06/25/2021
02/09/2021
10 Recycled Water Irrigation CAD Toolbox  
11 Water, Sewer, and Recycled Water CAD Toolbox  
12 Connections to Existing Facilities AFS Toolbox  
Overview

Water Standard Drawings

For Water System Construction