Skip to main content
Eastern Municipal Water District Home
Home
Work With Us
Development
Engineering Standards, Specifications and Drawings
Work With Us

Engineering Standards, Specifications and Drawings

Engineering drawings

Select the specification you need from the list below.

Though many of the actual specifications can be found in the Engineering Provisions area of this site, below are some other guidelines that may be helpful.

Guidelines for Booster Pump Stations, Lift Stations and Reservoirs

In addition, the following are also available:

Approved Materials List Requirements Letter (EN-194) (06/07/2022)
Approved Materials List (See Engineering Provisions)
Approved Soils Engineers List for Developers (12/01/2025)
Approved Probationary Soils Engineers List for Developers (08/05/2026)
Hot Tap Contractors (04/25/2024)                                                                                                     

 SpecificationRevision Date
 Development Services Department and Facility Design Guidelines08/07/2025
 

General Construction Specifications

Provisions that comprise this specification:

  • Section 02201 – Construction Methods and Earthwork
  • Section 02252 – Control Density Fill
  • Section 03300 – Cast-in-Place Concrete
See Engineering Provisions
 Approved Materials ListSee Engineering Provisions
 Recycled Water Irrigation Guidelines
Mitigation Measures & CAD Standard Guideline
06/25/2021
02/09/2021
 Recycled Water Irrigation CAD Toolbox 
 Water, Sewer, and Recycled Water CAD Toolbox 
 Connections to Existing Facilities AFS Toolbox 
 CAD Toolbox  

Water Standard Drawings

For Water System Construction

Drawing No.DescriptionRevision Date
A-540Emergency Shower & Eyewash04/29/2010
B-255Installation of Vertical Gate Valves (Steel Pipe 14" & Larger; AC, PVC & DI Pipe 4" & Larger)11/02/2022
B-271Saddle Outlets - 3/4" to 36"10/28/2026
B-271AHop Tap Saddle Outlets 3/4" to 36" Diameters08/23/2021
B-286BTrench Backfill04/23/2026
B-288Steel Flanges, 4" to 54"09/11/2020
B-304Butt Strap Details09/11/2020
B-3421 1/2" Meter Installation04/06/2022
B-342A1 1/2" Copper Service Connection03/20/2024
B-3442" Meter Installation10/22/2025
B-344A2" Copper Service Connection09/29/2022
B-3516" x 1 - 2 1/2" Blow Off Installation (Steel Pipe)04/23/2021
B-3566" x 1 - 2 1/2" & 1 - 4" Fire Hydrant Installation (Steel Pipe)08/11/2025
B-3576" x 1 - 2 1/2" Blow-off Installation for AC, PVC & DI Pipe04/23/2021
B-3626" x 1 - 2 1/2" & 1 - 4" Fire Hydrant Installation for AC, PVC & DI Pipe08/11/2025
B-3672" Air Valve Installation05/29/2019
B-407Thrust Block Installation for Hub-End Pipe05/05/2022
B-408Water Pipe Installation and concrete Cap Detail for ACP, PVC & DI Pipe04/23/2021
B-5166" x 2 - 2 1/2" x 1 - 4" Fire Hydrant Installation (Steel Pipe)08/11/2025
B-5176" x 2 - 2 1/2" x 1 - 4" Fire Hydrant Installation for AC, PVC & DI Pipe08/11/2025
B-533Telemetry Wire & Terminal09/11/2020
B-5614" x 1 - 2 1/2" Blow-Off Temporary End Installation (Steel)04/23/2021
B-563Steel Pipeline - Pipe Pad or Coupling for Cast Iron Fittings04/23/2021
B-5686" x 1 - 2 1/2" Blow Off Temporary End Installation for AC, PVC & DI Pipe04/23/2021
B-575Steel Pipe Casing Water Pipeline09/11/2020
B-577Installation of Butterfly Valves09/11/2020
B-5783"-10" Air Vacuum & Air Release Valve Installation11/18/2020
B-5905/8" Meter Service Connection, 1" Copper Tubing04/06/2022
B-590A1" Copper Service Connection03/03/2025
B-5911" Meter Service Connection, 1" Copper Tubing04/06/2022
B-597AReduced Pressure Backflow Preventer Assy for 3/4" - 2"03/24/2021
B-597BReduced Pressure Backflow Preventer Assy for 2 1/2" - 3"04/07/2022
B-597CReduced Pressure Backflow Preventer Assy for 4" - 10"09/15/2020
B-5981" Air Valve Installation, 1" Copper Tubing05/29/2019
B-6333" Meter Installation04/24/2024
B-6344" Meter Installation04/06/2022
B-6356" Meter Installation04/06/2022
B-6368" Meter Installation04/06/2022
B-638Steel Cylinder Pipe- Field Joint Details Welded & Bonded Rubber Gasket05/03/2019
B-6536" x 1 - 4" Blow-Off Installation - Saddle Tangent Outlet - Steel Pipe04/17/2000
B-656Locator Wire Installation10/28/2026
B-6574", 6", 8" or 10" Double Check Detector Assembly & Reduced Pressure Detector Assembly03/20/2019
B-658Service Connections 1" through 4" on Water Appurtenance Lateral or Watermain 16" or Larger05/06/2019
B-659Air Test Details05/06/2019
B-660Test Stations: Insulated Joint and Insulated Joint at Valve05/03/2019
B-661Thermite Weld Details06/19/2019
B-662Test Stations: Line Current, Basic & Pipe with Casing05/06/2019
B-663Standard Restraint Tee, Dead End, Bend for PVC C-900 & C-90505/06/2019
B-665Guard and Marker Posts05/03/2019
B-666Formed Sealant Groove Detail and Typical Crack Repair03/01/2002
B-668Valve Cap & Riser Detail05/03/2019
B-9324" & 6" Pressure Regulator above Ground Installation09/30/2024
B-9338” Pressure Regulator above Ground Installation09/30/2024
B-934Recessed Trench Plate Detail05/03/2019
B-935Potable Water Sample Station05/06/2019
B-966Double Check Backflow Preventer Assy for sizes 3/4" - 2"01/19/2024
B-967Double Check Backflow Preventer Assy for sizes 2 1/2" - 3"09/15/2020
B-968Double Check Backflow Preventer Assy for sizes 4" - 10"09/15/2020
B-976Read Hole For Meter Vaults - Relacing A-49609/15/2020
B-977Typical Steel Tank Circumferential Stairway (sheet 1 of 2)04/16/2024
B-978Typical Steel Tank Circumferential Stairway (sheet 2 of 2)08/15/2012
B-979Steel Tank Roof Access Platform and Hatch10/10/2024
B-984Steel Tank Roof Hatch10/10/2024
B-986Reduced Pressure Backflow Device Facility Intertie04/15/2024
B-987EMWD Facility Monument Sign09/17/2021
B-9934" & Larger Service Connection04/06/2022
B-994Meter Cage - Flange Mount05/03/2019
B-1024Wellhead Pump Foundation01/03/2023
B-1073Trench Backfill and Roadway Repair (City of Moreno Valley)04/23/2026
B-1075Chain Link Fence01/09/2023
B-1077Residential Meter Bank Installation 08/20/2026
B-1080Reduced Pressure Backflow Device Facility-Intertie Removal05/12/2026

Water System Specification: Detailed Provisions

Provisions that comprise this specification:

  • Section 02718 – Installation of Water Pipeline
  • Section 15057 – Ductile Iron Water Pipe & Fittings
  • Section 15058 – Cast Iron Fittings
  • Section 15059 – Welded Steel Fittings
  • Section 15061 – Steel Cylinder Water Pipe
  • Section 15064 – Plastic (PVC) Water Pipe & Fittings
  • Section 15072 – Asbestos-Cement Water Pipe
  • Section 15081 – Gaskets
  • Section 15089 – Nuts & Bolts
  • Section 15102 – Resilient-Seated Gate Valves
  • Section 15103 – Butterfly Valves
See Engineering Provisions

 

Sewer Standard Design Drawings

For Sewer System Construction

Drawing No.DescriptionRevision No.Revision Date
SB-8Locking Type Manhole Cover & Frame511/23/2022
SB-30Reinforced Precast Shallow Manhole707/07/2021
SB-49Pipe Casing (Sewer Main)406/28/2019
SB-52Sewer Cleanouts101/20/2023
SB-53Precast Reinforced Concrete, 48" & 60" ID Manhole607/07/2021
SB-54Precast Reinforced Concrete, 60" & 72" ID Flat top607/07/2021
SB-58Terminus Manhole407/07/2021
SB-61Manhole Cover & Frame Standard & Watertight Manholes710/23/2024
SB-63Sewer Connection at Concrete Encasement601/09/2023
SB-70Grease Interceptor with 24" Sampling Box501/16/2025
SB-70AGrease Interceptor with 24" Sampling Box (Midwall Outlet)Original02/11/2025
SB-7336" ID Sampling Manhole Precast Reinforced Concrete307/07/2021
SB-75Sand / Oil Interceptor with 24" Sampling Box501/16/2025
SB-157Pipe Zone Bedding for Sewer Pipe802/02/2024
SB-158Trench Backfill for Sewer Pipe604/23/2026
SB-159Classification of Pipe Zone Bedding for Sewer Pipe704/23/2013
SB-176Sewer Lateral Connections209/25/2020
SB-177Sewer Lateral406/28/2019
SB-17948" and 60" Diameter Manhole Installation for HDPE Sewer Main305/06/2019
SB-181Paving Around Manholes111/23/2022
SB-182Connecting Dissimilar Sewer PipesOriginal06/11/2019
SB-183Existing Sewer Manhole Median InstallationOriginal06/11/2019
SB-184Sewer Concrete AnchorOriginal04/14/2023
SB-185Manhole Location Restriction102/13/2025

Sewer Specification – Detailed Provisions

Provisions that comprise this specification:

  • Section 02761 – Furnish & Install VCP Sewer Pipe System
  • Section 02762 – Furnish & Install Plastic Sewer Pipe System
  • Section 02769 – Furnish & Install High Density Polyethylene (HDPE) Sewer Pipe System
  • Section 15330 – Vitrified Clay Sewer Pipe (Plain End)
  • Section 15331 – Vitrified Clay Sewer Pipe (Bell & Spigot)
  • Section 15333 – Cast Iron & Ductile Iron Sewer Pipe
  • Section 15340 – Manholes & Fittings
See Engineering Provisions